Home

INSPECTION

SETTING THE
INSPECTION STANDARDS
NOW AND INTO THE
FUTURE

MEANS

PROTECTION

SERVICES

CORPORATE INSPECTION SERVICES

Building Condition Audits

Providing clients with a written inspection report identifying the defects and code violations both through visual assessment and MEP systems of the buildings common area assets. The primary purpose of the Inspection is to enhance the client’s information and knowledge about the building to improve decision-making for purchasing, selling, maintaining or improving the property to meet statutory requirements as part of the handover process.

Client’s Technical Representative

Protecting the client with clear concise knowledge of building practices, material specifications and construction codes. Educating contractors on common construction mistakes and poor practices that effect the life cycle of properties and impact the maintenance cost. Ensuring the clients vision is achieved and maintained throughout the project process. An invaluable asset in the often-confusing process of construction or retro fitting existing properties.

Building Handover Inspection

Providing private purchasers, Owners Associations, and corporate bodies (including government) a clear and concise inspection report that highlights all issues with a property prior to accepting the handover. We provide a detailed and easily understood report on the status of the property which can then be shared with other parties to address the issues identified prior to the final handover.

Asset Condition Audits

Providing vital management information to our clients enabling them to assess and evaluate the performance of their specialist maintenance service providers through a detailed independent third party report, enabling us to measure their performance against Key Performance Indicators (KPls) which tend to be written into their Service Level Agreement.

Asset Registration Creation

Ensuring that your existing asset registers contain the right information and help you to set up code compliant inspection, testing and maintenance logs and also verifying the asset tagging.

3rd Party Maintenance Audit

Ensuring that the quality of the client's building is maintained over time owners are requesting maintenance audits just like they require financial audits. We carryout maintenance audits for owners (single & joint) and assist in Facility Service providers compliance.

HOME OWNER / PURCHASER INSPECTION SERVICES

Handover Inspection

This inspection is extremely valuable to an owner when preparing to accept handover of a new propery. We will provide a detailed inspection report within 72 hours, which can then be shared with the Construction/Development Company before final signature.

Resale Inspection

Similar to the handover inspection, it provides the perfect document for both purchaser and vendor to work form to resolve any outstanding issues prior to final signing.

Move-in/Move-out Inspection

It protects the interests of teh owner and the tenants by creatin and independent move in/move out document.

Solution Investigations

Ensuring that the quality of the client's building is maintained over time owners are requesting maintenance audits just like they require financial audits. We carryout maintenance audits for owners (single & joint) and assist in Facility Service providers compliance.

11th Month Warranty Inspection

Home/property inspections prior to the expiration of the new home 1 year warrranty/defect liability period will provide an authoritative list of items that need attention by the developer.

SPECIALIZED INVESTIGATIONS SERVICES

Moisture/Water Removal

Moisture ingression is either insidious as a result of high humidity levels. Snag and Inspect has specialized dehumidifier, construction vacuum, blower   equipment   and   humidity sensors to take the moisture out, remove excess water and reduce humidity in order to reach a certain target of dryness required for your property. The removal of moisture is the key to restrict the growth and/or spread of Mold.

Thermographic (IR) Inspection

This will help identify any surface temperature  variance  which  may  lie below the surface of a wall, or a floor, and other places that are usually out of sight. The technology allows us to see gaps from wall to ceiling; cracks in the walls that are hidden by the rendering or tiled wall finishes, water leaks, trapped moisture and faulty electrical connections and components .

Mould & Smell Investigation

Our inspector are certified and highly trained professionals to investigate mold. Not only do they know how to properly conduct mold tests, but they know how to interpret the results or condition and can tell you what levels of mold are expected in your area and how to avoid it. Mold and Smell Investigation service is important not only is to improve the smell of your home hence, it's important to protect your health as mold can cause many medical problems. MOF 500 also kills all types of Mold Spores stopping the spread of mold and the very costly clean-up of mold.

Pipeline Inspection

Providing pipeline inspection using an optic pipe camera which will allow us to get a thorough look at the pipes, without doing any damage to the home or building. Our specialised high tech cameras can also be used to identify and locate broken and damaged pipe work

Air and Water Quality

We work with  government  approved analytical laboratories for sample analysis.

Health and Safety Audits

Providing independent annually or 6 monthly HS&E audits of a property will provide assurances that sensible and appropriate precautions are being taken to mitigate risk and provide a safe environment for the tenants / guests / occupants residing and working with the premises.

Special Needs Access Inspection

Providing a detailed inspection report outlining the minimum requirement for making buildings, schools, and other establishments more appropriate to cater the people with special needs using facility as highlighted in the UK's Disability Discrimination Act and also taking into consideration the requirements outlined in Article 27 of the Dubai Municipality Building Code.

SERVICES

CORPORATE INSPECTION SERVICES

Providing clients with a written inspection report identifying the defects and code violations both through visual assessment and MEP systems of the buildings common area assets. The primary purpose of the Inspection is to enhance the client’s information and knowledge about the building to improve decision-making for purchasing, selling, maintaining or improving the property to meet statutory requirements as part of the handover process.

Protecting the client with clear concise knowledge of building practices, material specifications and construction codes. Educating contractors on common construction mistakes and poor practices that effect the life cycle of properties and impact the maintenance cost. Ensuring the clients vision is achieved and maintained throughout the project process. An invaluable asset in the often-confusing process of construction or retro fitting existing properties.

Providing private purchasers, Owners Associations, and corporate bodies (including government) a clear and concise inspection report that highlights all issues with a property prior to accepting the handover. We provide a detailed and easily understood report on the status of the property which can then be shared with other parties to address the issues identified prior to the final handover.

Providing vital management information to our clients enabling them to assess and evaluate the performance of their specialist maintenance service providers through a detailed independent third party report, enabling us to measure their performance against Key Performance Indicators (KPls) which tend to be written into their Service Level Agreement.

Ensuring that your existing asset registers contain the right information and help you to set up code compliant inspection, testing and maintenance logs and also verifying the asset tagging.

Ensuring that the quality of the client’s building is maintained over time owners are requesting maintenance audits just like they require financial audits. We carryout maintenance audits for owners (single & joint) and assist in Facility Service providers compliance.

HOME OWNER / PURCHASER INSPECTION SERVICES

Ensuring that the quality of the client’s building is maintained over time owners are requesting maintenance audits just like they require financial audits. We carryout maintenance audits for owners (single & joint) and assist in Facility Service providers compliance.

Home/property inspections prior to the expiration of the new home 1 year warrranty/defect liability period will provide an authoritative list of items that need attention by the developer.

It protects the interests of teh owner and the tenants by creatin and independent move in/move out document.

This inspection is extremely valuable to an owner when preparing to accept handover of a new propery. We will provide a detailed inspection report within 72 hours, which can then be shared with the Construction/Development Company before final signature.

Similar to the handover inspection, it provides the perfect document for both purchaser and vendor to work form to resolve any outstanding issues prior to final signing.

SPECIALIZED INVESTIGATIONS SERVICES

Providing a detailed inspection report outlining the minimum requirement for making buildings, schools, and other establishments more appropriate to cater the people with special needs using facility as highlighted in the UK’s Disability Discrimination Act and also taking into consideration the requirements outlined in Article 27 of the Dubai Municipality Building Code.

This will help identify any surface temperature  variance  which  may  lie below the surface of a wall, or a floor, and other places that are usually out of sight. The technology allows us to see gaps from wall to ceiling; cracks in the walls that are hidden by the rendering or tiled wall finishes, water leaks, trapped moisture and faulty electrical connections and components .

Our inspector are certified and highly trained professionals to investigate mold. Not only do they know how to properly conduct mold tests, but they know how to interpret the results or condition and can tell you what levels of mold are expected in your area and how to avoid it. Mold and Smell Investigation service is important not only is to improve the smell of your home hence, it’s important to protect your health as mold can cause many medical problems. MOF 500 also kills all types of Mold Spores stopping the spread of mold and the very costly clean-up of mold.

Providing pipeline inspection using an optic pipe camera which will allow us to get a thorough look at the pipes, without doing any damage to the home or building. Our specialised high tech cameras can also be used to identify and locate broken and damaged pipe work

We work with  government  approved analytical laboratories for sample analysis.

Providing independent annually or 6 monthly HS&E audits of a property will provide assurances that sensible and appropriate precautions are being taken to mitigate risk and provide a safe environment for the tenants / guests / occupants residing and working with the premises.

Moisture ingression is either insidious as a result of high humidity levels. Snag and Inspect has specialized dehumidifier, construction vacuum, blower   equipment   and   humidity sensors to take the moisture out, remove excess water and reduce humidity in order to reach a certain target of dryness required for your property. The removal of moisture is the key to restrict the growth and/or spread of Mold.

SERVICES

CORPORATE INSPECTION SERVICES

 

Providing clients with a written inspection report identifying the defects and code violations both through visual assessment and MEP systems of the building’s common area assets. The primary purpose of the Inspection is to enhance the client’s information and knowledge about the building to improve decision-making for purchasing, selling, maintaining or improving the property to meet statutory requirements periods.

 

Ensuring that your existing asset registers contain the right information and help you to set up code compliant inspection, testing and maintenance logs and also verifying the asset tagging.

 

Providing vital management information to our clients enabling them to assess and evaluate the performance of their specialist maintenance service providers through a detailed independent third party report, enabling us to measure their performance against Key Performance Indicators (KPls) which tend to be written into their Service Level Agreement.

 

Protecting the client with clear concise knowledge of building practices, material specifications and construction codes. Educating contractors on common construction mistakes and poor practices that effect the life cycle of properties and impact the maintenance cost. Ensuring the clients vision is achieved and maintained throughout the project process. An invaluable asset in the often-confusing process of construction or retro fitting existing properties.

 

Providing private purchasers, Owners Associations, and corporate bodies (including government) a clear and concise inspection report that highlights all issues with a property prior to accepting the handover. We provide a detailed and easily understood report on the status of the property which can then be shared with other parties to address the issues identified prior to the final handover.

 

Ensuring that the quality of the client’s building is maintained over time owners are requesting maintenance audits just like they require financial audits. We carryout maintenance audits for owners (single & joint) and assist in Facility Service providers compliance.

HOME OWNER / PURCHASER INSPECTION SERVICES

 

Fire and Safety inspection, insurance claims, bad smells, mould, unexplained damp patches, floor that are no longer flat, blocked drains. Snag & Inspect have the equipment, knowledge and expertise to investigate the problem and provide a solution.

 

Home/property inspections prior to the expiration of the new home 1 year warrranty/defect liability period will provide an authoritative list of items that need attention by the developer.

 

It protects the interests of teh owner and the tenants by creatin and independent move in/move out document.

 

This inspection is extremely valuable to an owner when preparing to accept handover of a new propery. We will provide a detailed inspection report within 72 hours, which can then be shared with the Construction/Development Company before final signature.

 

Similar to the handover inspection, it provides the perfect document for both purchaser and vendor to work form to resolve any outstanding issues prior to final signing.

SPECIALIZED INVESTIGATIONS SERVICES

 

Roviding a detailed inspection report outlining the minimum requirement for making buildings, schools, and other establishments more appropriate to cater the people with special needs using facility as highlighted in the UK’s Disability Discrimination Act and also taking into consideration the requirements outlined in Article 27 of the Dubai Municipality Building Code.

 

This will help identify any surface temperature  variance  which  may  lie below the surface of a wall, or a floor, and other places that are usually out of sight. The technology allows us to see gaps from wall to ceiling; cracks in the walls that are hidden by the rendering or tiled wall finishes, water leaks, trapped moisture and faulty electrical connections and components .

 

Our inspector are certified and highly trained professionals to investigate mold. Not only do they know how to properly conduct mold tests, but they know how to interpret the results or condition and can tell you what levels of mold are expected in your area and how to avoid it. Mold and Smell Investigation service is important not only is to improve the smell of your home hence, it’s important to protect your health as mold can cause many medical problems. MOF 500 also kills all types of Mold Spores stopping the spread of mold and the very costly clean-up of mold.

 

Providing pipeline inspection using an optic pipe camera which will allow us to get a thorough look at the pipes, without doing any damage to the home or building. Our specialised high tech cameras can also be used to identify and locate broken and damaged pipe work.

 

We work with  government  approved analytical laboratories for sample analysis.

 

Providing independent annually or 6 monthly HS&E audits of a property will provide assurances that sensible and appropriate precautions are being taken to mitigate risk and provide a safe environment for the tenants / guests / occupants residing and working with the premises.

 

Moisture ingression is either insidious as a result of high humidity levels. Snag and Inspect has specialized dehumidifier, construction vacuum, blower   equipment   and   humidity sensors to take the moisture out, remove excess water and reduce humidity in order to reach a certain target of dryness required for your property. The removal of moisture is the key to restrict the growth and/or spread of Mold.

0 +
Inspection Cases
$ 0 AED
Average Annual Home Savings
0 +
Satisfied Clients Since 2007

About Us

Snag and Inspect assists property professionals, novices, and all those in between in making their own decision based on technical fact. Ensuring that correct property investment decisions are made.

A forerunner in third-party home inspections and consultancy services, buyers can count on us to provide technical and factual assessment of the property and avoid costly mistakes invisible to the buyer’s untrained eyes. Snag and Inspect is INVESTMENT PROTECTION.

With more than 10 years industry experience, Snag and Inspect has a proven track record in carrying out accurate property assessments of both interior and exterior structures and the internal systems which include thorough review of the property’s MEP system, finishing, roofing, water lines,  functionality of the property systems and every imaginable facility in today’s world.

Snag and Inspect assists property professionals, novices, and all those in between in making their own decision based on technical fact. Ensuring that correct property investment decisions are made.

A forerunner in third-party home inspections and consultancy services, buyers can count on us to provide technical and factual assessment of the property and avoid costly mistakes invisible to the buyer’s untrained eyes. Snag and Inspect IS INVESTMENT PROTECTION.

With more than 10 years industry experience, Snag and Inspect has a proven track record in carrying out accurate property assessments of both interior and exterior structures and the internal systems which include thorough review of the property’s MEP system, finishing, roofing, water lines, electrical systems, functionality of the property systems and every imaginable facility in today’s world.

What Our Clients Say

Some of Our Previous Projects

Condition Audit + Reserve Fund + Reinstatement Cost Assessment for Dubai Hills Master Community

Based on the assessment of the current condition of the assets in the Master Community, Snag and Inspect created a Reserve Fund Study and Reinstatement Cost Assessment to ascertain the availability of funds for periodic maintenance as well as rebuild cost.

Third Party Audit for Azizi Developments

Snag and Inspect was requested to carry out an audit on the variations declared by the main contractor. An exhaustive eva-luation on work execution and cost was created for the project.

Dubai World Central Corporation

Established and assessed the property in terms of the accuracy and quality of the base build information provided, quality and condition of the base build and fit out MEP works done, and reviewed the design and/ or recorded information available, such as specifications, equipment schedules, O&M manuals, as-built drawings. The MEP and building approvals obtained from the authorities were carefully evaluated as well.

Deyaar Inspection
Audit

Building Condition Audit and special inspections were held on several residential buildings of Deyaar to ensure that all installations were done properly, and all equipment are working as per specification.

Get a Quote for Inspection.

Enter your contact information and we will call you back.


    Careers

    Previous
    Next